User Guide

Two-Way RF Transceiver Module Crestron
TPS-XTXRF
Setup
Programming with SIMPL Windows
SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use
programming language that is completely integrated and compatible with all
Crestron system hardware. The objects that are used in SIMPL are called symbols.
SIMPL Windows offers drag and drop functionality in a familiar Windows®
environment.
SIMPL Windows is Crestron's software for programming Crestron control systems.
It provides a well-designed graphical environment with a number of workspaces
(i.e., windows) in which a programmer can select, configure, program, test, and
monitor a Crestron control system.
The next two sections describe a TPS-XTXRF within SIMPL Windows. The first
section provides initial configuration information and the second section provides
the location of example programs.
NOTE: The following descriptions assume that the reader has knowledge of
SIMPL Windows. If not, refer to the extensive help information provided with the
software.
NOTE: To minimize system diagnostics and troubleshooting, Crestron recommends
defining the touchpanel as a wired unit in SIMPL Windows, then test functionality
as a wired network device prior to testing the TPS-XTXRF transceiver operations.
This will help in determining whether there is a programming problem, RF setting
conflict or RF interference in the environment.
Configure TPS-XTXRF Equipped Touchpanel
To create a program with a TPS-XTXRF, refer to the table below for initial
configuration information.
Configure TPS-XTXRF Program
SYMBOL SYMBOL DROP ADDITIONAL
FOLDER REQUIRED WHERE SETUP
Device Library,
Control
Systems
Desired control
system
System Views Refer to the documentation
supplied with the specific control
system for additional setup
information.
Device Library,
Wireless
Receivers,
Wireless
Receivers (RF)
TPS-RFGWX System Views,
Cresnet Units
CHANGE NET ID (OPTIONAL) -
Double-click on TPS-RFGWX (or
single-click then right mouse-
click). Select Configure. Select
NET ID then select desired
hexadecimal ID.
CHANGE RF ID (OPTIONAL) -
Single-click on TPS-RFGWX. In
the System Views Detail Window,
double-click (or single-click then
right mouse-click, select
Configure) on name of touch-
panel in TPSRF Address text
window. Select Configure.
Select RF ID then select desired
hexadecimal ID.
TPS-4500 w/
TPS-XTXRF,
TPS-5000 w/
TPS-XTXRF,
or TPS-6000 w/
TPS-XTXRF.
Device Library,
Touchpanels,
Touchpanels
(Wireless Two-
Way)
System Views,
TPS-RFGWX
14 • Two-Way RF Transceiver Module: TPS-XTXRF Operations & Installation Guide - DOC. 5844