User Guide

Crestron
TPS-XTXRF
Two-Way RF Transceiver Module
TPS-XTXRF Installed on Touchpanel (Side View)
Leading Specifications
The table below and continued on the next two pages provides a summary of leading
specifications for the TPS-XTXRF.
Leading Specifications of the TPS- XTXRF
SPECIFICATION DETAILS
Compatible Touchpanels
Use with TPS-4500 (except ZA11323),
TPS-5000, and TPS-6000
Power Requirements
TPS-XBTP battery pack
1
RF Transmitting Power
100 mW
Communications Bidirectional Spread Spectrum 2.4 GHz
(2400 to 2483 MHz)
1 The ability of a TPS-XBTP to charge and hold a charge depends on a number of
variables such as which Isys panel is used and the number of expansion cards installed
in the touchpanel. The data provided here are worst and best-case scenarios to provide
an idea of what can be expected.
Charge Time (worst case): 12 hours for the TPS-6000 (all three cards installed)
Charge Time (best case): 3.5 hours for all units (power is off)
Battery Life (worst case): 2 hours (full brightness) for the TPS-6000 (all 3 cards
installed)
Battery Life (best case): 3.5 hours (full brightness) for the TPS-4500 (no cards installed)
In conclusion, the best condition for charging a battery is with the panel powered down.
Furthermore, the optimum operating conditions for extending battery charge requires
that the brightness be kept to a minimum, minimizing the standby and power down
timeouts, and avoid overheating/freezing.
Operations & Installation Guide - DOC. 5844 Two-Way RF Transceiver Module: TPS-XTXRF • 3