Specifications

Crestron TPS-XVGAL RGB Computer Interface Card for TPS/Lectern Panel
NOTE: The TPS-XVGAL interface connector pins are more easily
inserted by gently “rocking” the TPS-XVGAL side-to-side while
pressing onto motherboard connector.
5. As shown below, align the pins on the interface connector of
the card with the motherboard connector. Do not force pins into
connector. Press the TPS-XVGAL until pins are fully seated.
Make sure that the four attached knurled mounting screws align
with mounting posts of the motherboard.
Installation Diagram 4 of 7 - Install TPS-XVGAL
6. Tighten the knurled mounting screws to finger-tight.
CAUTION: To prevent over-heating of the card during operation, make
sure that the fan electrical connector has remained attached to the PCB
connector of the TPS-XVGAL.
CAUTION: The TPS-XVGAL video input connectors may have to be
aligned slightly to fit through the openings in the rear cover. Align the
connectors of this card (or any other optional card that is installed)
carefully to prevent damage to the card, cover, or TPS user interface.
Operations & Installation Guide - DOC. 5945 RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL • 7