User Guide

ManualsBrandsCrestron ManualsOtherWMKB-1000L

Wall Mount Bracket Kit: WMKB-1000L

Description

The WMKB-1000L, a post-construction, optional wall mount kit, consists of brackets and mounting

hardware (refer to table below for list of items included). It is designed specifically for Crestron’s

4-inch wall-mounted touchpanels, the CT-1000 and LC-1000. The kit includes 10 individually packed,

single-use bags of mounting material. Conveniently, each bag contains a template, two brackets, and

four screws to mount one touchpanel.

Contents of WMKB-1000L

ITEM PART # QUANTITY

Mounting Bracket 4001193 20 (or 2 per bag)

Pan Phillips Screw, #4-40 x 1” 2007186 40 (or 4 per bag)

Template 2005025 10 (or 1 per bag)

Mounting Procedure

The Series 1000 touchpanel is a low-voltage unit that can be installed directly into a mounting surface.

Each touchpanel utilizes the mounting hardware provided in a single bag from the WMKB-1000L.

Complete the following mounting procedure in the order provided. The only tools required are

masking tape (or equivalent), a gypsum board saw (or equivalent), and a #2 Phillips tip screwdriver.

1. Locate an area on the wall that is free of miscellaneous wiring and studs.

2. Make a small hole near the middle of the designated site; verify that the location is

suitable.

3. Using masking tape (or equivalent), fasten template to mounting surface; verify that the

template is level.

4. Cut out and remove the traced shape of the mounting surface (refer to illustration after

this step).

Removing Template Cut Out

(

)

Installation Guide - DOC. 6283 Wall Mount Bracket Kit: WMKB-1000L • 1

Summary of content (4 pages)

PAGE 1
Wall Mount Bracket Kit: WMKB-1000L Description The WMKB-1000L, a post-construction, optional wall mount kit, consists of brackets and mounting hardware (refer to table below for list of items included). It is designed specifically for Crestron’s 4-inch wall-mounted touchpanels, the CT-1000 and LC-1000. The kit includes 10 individually packed, single-use bags of mounting material. Conveniently, each bag contains a template, two brackets, and four screws to mount one touchpanel.
PAGE 2
Crestron WMKB-1000L 5. Wall Mount Bracket Kit Use four pan head screws, supplied, to attach two mounting brackets to the touchpanel (refer to illustration after this step). Do not tighten screws. The screw threads should catch the mounting brackets, but not pass more than 1/16" through to the other side of the opening. Mounting Bracket/Touchpanel Assembly 6. Attach the Cresnet cable in the wall to the connector on the back of the touchpanel.
PAGE 3
Wall Mount Bracket Kit Crestron WMKB-1000L Secure Mounting Bracket/Touchpanel Assembly and Add Plastic Buttons and Cover Further Inquiries If after reviewing this Installation Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. • In Europe, call Crestron International at +32-15-50-99-50.
PAGE 4
Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.