User`s guide

Chapter Two - 10
Operating Information
Shut down
Before shutting down, please always remember to save the unfinished works
and close the application for preventing from any possible data loss or HDD
damage.
“Shut down” will totally turn OFF the power of your notebook computer. If you
want to start your notebook computer again, you need to press the power
switch.
Sleep/ Hibernate
Sleep
Under “Sleep” mode, the system will temporarily save your work into RAM.
You are able to do enter “Sleep” mode by directly clicking from your OS. Or,
you can do the “Sleep” Mode settings in your OS. If you want to start your
notebook computer again, all you need to press any key.
Hibernate
Under “Hibernate” mode, the system will save your work into HDD. You are
able to do enter “Hibernate” mode by directly clicking from your OS. Or, you
can do the “Hibernate” Mode in your OS. If you want to start your handheld
computer again, you need to press the power switch.
Note:
 Standby/Hibernate/Resume works with both AC adapter and
battery. The power management functions may not work
under non-ACPI operating systems.
 If you work under Windows 7 (64 bit) with external KB or
mouse, please do the Windows Setting as follows:
1. External Mouse: Device Manager → Mice and other
pointing devices → HID- compliant → Power
Management → Disable “Allow this device to wake the
computer”
2. External KB: Device Manager → Keyboards → HID-
compliant → Power Management → Disable “Allow this
device to wake the computer”