User`s guide

Chapter Two - 23

Operating Information

Mounting the DockUnder:

1. Turn OFF the power.

2. Open the rubber cap of the docking connector.

3. Align the docking connector.

4. Loosen the bolts.

5. Push the computer horizontally to join the guiding pins.

6. Pull the metal bar outwards.

7. Pull up the metal bar.

8. Move forward inside.

9. Lock the bolts.

10. Key Locked with Electric Power ON／OFF.

11. Power On/Off with Computer.

The Power On/Off can be replaced for Computer itself.

Note:

 Do not lift up the computer while engaging.

○