System information
Backup
Battery
Port,
Harness
and
Bracket
(White
2-Pin
Connector)
If
the backup battery feature is desired, open the battery compartment on the
control module by sliding the top rear
of
the case outward. Plug the 2-pin wiring
harness onto the battery, and then plug the 2-pin connector into the backup battery
port inside the module. Insert the 9-volt battery into the cavity in the case, and
secure it by reinstalling the case door and sliding it closed.
Sensor
Ports
(Two White
4-Pin
Ports)
Install the includedimpact and glass breakage sensoraccording to the instruction
sheet included with it, and then plug its wiring harness into either
of
these ports
(their operation is the same). The second port allows an easy plug-in addition
of
an
optional second sensor.
Data
Port
(Green
4-Pin
Port)
Omega data bus interface modules, and remote start bypass modules, are
available as analog-operated, and as direct data-to-data (D2D) devices. The former
may be operated by connection to the DLS port. The later are the Omega IntelliKit
data bus interface modules and bypass kits, which simply plug into this Green port.
Eithertype
of
Omegaaccessory moduleincludes its own vehicle-specific instructions.
Please refer to the Omega website, www.caralarm.com. for the latest vehicle-
specific application guide.
Although other brands
of
data bus modules may
physically pluginto the Crime Guard data port, only genuine Omega IntelliKit
modulesofferthehighestconsistentqualityanddependableoperation.
Always
choose Omega databus product for use with this port.
Page - 23