System information
Feature
#3
Automatic Rearming
Factory Default Setting Off
(press "armllock" button to program)
Options:
On
without doors locking (press "disarm/unlock" button to program)
On
with doors locking (press "II" button to program)
"Automatic Rearming" prevents the system from becoming accidentally disarmed
by having it arm itself after being disarmed,
if
a door is not then opened or the
ignition turned on. Options are to have Automatic Rearming operate with or
without also locking the doors when the system does rearm.
Feature
#4
Starter Interrupt Functions
Factory Default Setting
On
(press "armllock" button to program)
Options:
Off
(press "disarm/unlock" button to program)
Automatic (press "II" button to program)
This feature controls the Starter Interrupt circuit, in several ways. In its default
setting, "On", the Starter Interrupt is operable whenever the alarm is armed.
The "Automatic" option will cause the Starter Interrupt output
to
automati-
cally engage 90 seconds after the ignition switch
is
turned "off", and also 90 sec-
onds after disarming the system. This automatic engagement will occur even
if
the
security system is in a disarmed state, but not
if
it is in Valet Mode. Once the
Starter Interrupt output is activated, the system must be armed, then disarmed with
the controller or transmitter, or placed into the Valet Mode by pressing and hold-
ing the Valet Switch for 2 seconds to disengage it. There are no Status Light
indications with this automatic form
of
Starter Interrupt.
Programming this feature
"Off'
completely eliminates the Starter Interrupt
output, while leaving all other system operations fully functional.
Feature
#5
Ignition Activated Override
Factory Default Setting Off (press "disarm/unlock" button to program)
Option:
On
(press "armllock" button to program)
This feature allows an activated system to be overridden and disarmed by simply
turning the ignition switch on within 10 seconds
of
the system's activation. After
10
seconds, the Emergency Override must be performed or the controller or trans-
mitter
"disarm/unlock" button can be used to disarm the system.
Feature
#6
Doors Lock With Ignition
On
Factory Default Setting
On
(press "armllock" button to program)
Option: Off (press "disarm/unlock" button to program)
This feature configures the system to automatically lock the vehicle's doors every
Page - 26