System information

The 2-Way Controller
The four system- operating buttons are described on pages 4-7. This section
explains the controller's icons, and how to program the controller's features.
Controller Icons: The LCD screen on the controller has various icons which
indicate system status. When the controller
is used to operate the system, it receives
back a signal which causes it to chirp (emulating the siren) and display the
appropriate icons. Brief descriptions
of the icons are:
This readout also
• The "DISARM" also shows
"ARM"; to indicate the Armed
or Disarmed status
of the sys-
tem. Neither icon is present
when the system is in Valet
Mode.
• The digit readout is a clock, with AM and PM indication.
shows how which
ve~icle is fi g A~ _~ %7~[L~
selected (1 or 2) and lS used for ~~~~~/:~:::;;:;:::;:~~ __ ~_~;:-~
the timer'functi~ns (page 20). I ~ I
® ~~~~t-:J\~~~
• The locked or unlocked padlock (windshield) reflects the locked or unlocked
doors status as last operated by the system (certain programmable
features can automatically arm the system, but not lock the doors). Arming
with the controller
or transmitter always locks the doors; when disarming they
will unlock unless the system is activated and sounding.
• "VALET" indicates alarm Valet Mode, replacing the
"ARM" or "DISARM"
icons. A musical tone occurs when placing the system into Valet I\10de.
• When
"BAT LOW" appears the transceiver's 1.5 volt AAA battery should be
replaced with a new battery.
• The controller's chirps and musical tones may be turned off, which makes the
unit vibrate instead; "MUTE" indicates this state.
• The
"3" within a circle appears when the 3rd Channel Output is operated.
• "HOOD/TRUNK" indicates that this vehicle zone is or has been violated.
If
associated with the system being activated, the controller also emits chirps,
until any button
is pressed. In this case, the icon remains flashing until the
ignition switch is turned on.
• The "crossed-out key" icon, on the hood area, only appears when the controller
is used with systems having built-in remote starting. This icon indicates an
aborted remote starting due to a violated safety circuit. The system can
Page - 17