System information
sided adhesive tape, and two screws.
If
using the adhesive tape, properly prepare
the mounting surfaces to ensure good adhesion.
If
using the screws for a more
permanent mounting, carefully separate the housing halves, install the screws
(avoid overtightening), then snap the assembly halves back together. Carefully
route the wiring harness to the control module to avoid any chances
of
it being
chafed
or
pinched.
Power Doorlock Options: The unique flexibility
of
the 750i
6
and 650i
6
is also found in multiple options for interfacing the vehicle power doorlocks.
Internal Relays- Both models feature internal relays, which are programmable
for several different functions. Thee default settings are "lock" and "unlock", with
optional operations consisting
of
parking light, horn,
or
two additional remote
channels, as latching
or
on demand. Relays are not always needed for doorlock
connection, and the following two options offer further flexibility that the internal
relays can be available for optional functions.
DLS Port- The second option is the traditional
"DLS"
port, which can accept
all Omega analog doorlocking accessories (dual, triple relay sockets, or the modular
clip-on add-on relay packs) and direct-wire basic 3-wireNegativepulsedoorlocking
systems. All Omega doorlocking data bus module accessories can be driven by
either this port, and the DLS port offers two unlocking outputs, so that driver's door
priority unlocking can be configured.
Data Port for IntelliKit Modules &Bypasses:
Omega
IntelliKit data bus
interface modules and bypass kits simply plug into this port. These data-to-data
(D2D) accessory products save time, and in many cases offer the only acceptable
interface means for many newer vehicle's doorlocking system and/or for the OEM-
antitheft bypass when adding an alarm or an optional accessory remote start module
with the Crime Guard. Omega offers the industries most comprehensive line
of
these products (go to www.caralarm.com for latest application guide), and each
includes its own vehicle-specific instructions.
Backup Battery: Both models have backup battery capability. Included
are the 9 volt battery, the wiring harness and slide-on clip mounting bracket.
If
the
system loses vehicle power it will revert to operating with basic security functions,
if
the backup battery is installed.
Dual Auxiliary Sensor Ports: Both models also feature two auxiliary
sensor ports.
The
included impact sensor plugs into one port, and the second allows
the easy addition
of
a further optional sensor. Each
of
the ports is dual-zoned: the
first zone will respond by chirping the siren only; and the second zone will fully
triggerthe system, and both have identical layout and operation. The included glass
breakage and dual-zone impact sensor is packaged with its own instruction sheet,
as are all
of
the optional Omega sensors which can be further added.
Page - 5