Instruction Manual

4
A32-0004
Use level to make a line on wall.
Use un nivel para hacer una línea en la pared.
Utilisez le niveau pour faire une ligne sur le mur.
CINDER BLOCK & CONCRETE INSTALLATION
1b-1
Use wall plate (C) to mark hole location on line.
Use la placa de pared (C) para marcar la ubicación del agujero en la línea.
Utilisez la plaque murale (C) pour marquer l’emplacement trou sur la ligne.
CINDER BLOCK & CONCRETE INSTALLATION
1b-2
1b-1
1b-2
1b-4
Insert (B) into both holes. Use a hammer to tap in if necessary.
Insertar (B) en ambos orificios. Utilice un martillo para golpear en caso de necesidad.
Insérer (B) dans les deux trous. Utilisez un marteau pour enfoncer dans le cas échéant.
1b-4
CINDER BLOCK & CONCRETE INSTALLATION
B
Use 10mm - 3/8” drill bit to make a 65mm - 2.5” hole on marks.
El uso de 10mm - broca 3/8” hacer un 65mm - 3” agujero en materia de marcas.
Utilisez 10mm - foret 3/8” faire un 65mm - 3” trou de sur les marque.
1b-3
1b-3
CINDER BLOCK & CONCRETE INSTALLATION
drill depth
65mm / 2.5”
drill diameter
10mm
3/8”