INSTRUCTION MANUAL MNBX18
Safety information Important - Please read these instructions fully before installing or operating Power source • The appliance can be connected to a 220-240 volt 50Hz AC supply by means of the supplied mains adaptor. • When using the 12V in-car adaptor the compact fridge should not be left connected for long periods of time when the engine is not running. • DO NOT connect directly to a 24V lighter socket of a heavy duty vehicle.
Safety information Important - Please read these instructions fully before installing or operating Heat sources and flames • To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Ventilation and location • Avoid using locations where dust or other airborne contamination may be drawn into the fan. • Allow at least 10cm distance from the back and sides of the compact fridge to allow the withdrawn heat to disperse.
16 litre compact fridge Introduction Please read these instructions carefully. They contain important information which will help you get the best from your product and ensure safe and correct installation and operation. Accessories 1. 16L compact fridge 3. Mains power cable 2. In-car power adaptor Features 1 2 3 4 5 7 8 9 6 OFF HOT COLD MAX ECO OFF HOT COLD MAX ECO AC220-240V~50Hz AC220-240V~50Hz DC 12V DC 12V 10 11 12 9 13 1. Door handle 6. MODE switch 10.
16 litre compact fridge Operating instructions Connecting the power (in-car only) Set the MODE switch (12) to the OFF position before connecting to the car power supply. 1. Insert the smaller end of the IN-CAR power cable into the IN-CAR POWER DC input (11) on the rear of the fridge. OFF WARNING: DO NOT connect to a 24V power socket. HOT COLD MAX ECO AC220-240V~50Hz DC 12V Car cigarette lighter socket 2.
16 litre compact fridge Product support Operating the fridge 1. Switch to COLD using the MODE switch (6) (cooling begins and the green LED illuminates). Switch to HOT mode using the MODE switch (6) (the warming function begins and the red LED illuminates). OFF HOT COLD OFF HOT 2. When the MODE switch (6) is set to OFF neither function is active (no LED is illuminated). 3.
16 litre compact fridge Product support Please note: • Cool air from inside the compact fridge draws moisture out of nearby warmer air, which condenses on the inner surface. Wipe away any moisture build up with a soft cloth and avoid opening the fridge door regularly to reduce excessive condensation build-up. • If the mini fridge is powered off after an extended period then condensation may collect underneath the unit.
16 litre compact fridge Product support Disposal • Disposal of your old product. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused • When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. • Please make yourself aware of the local collection system for electrical and electronic products.
16 litre compact fridge Product support Troubleshooting NOTE: The fan will periodically stop when the fridge is in WARM mode. This is normal operation. Problem Solution The fridge is not functioning and the fan is not spinning. • Check the power cable is connected correctly and the MODE switch is set to either HOT or COLD • The in-car adaptor (cigarette lighter end) may have debris preventing the contact. If necessary clean with a non metal brush and solvent.
16 litre compact fridge Product support The compact fridge is not cooling sufficiently. The compact fridge is not warming sufficiently 10 • Check the MODE switch is set to COLD (the green LED is illuminated). ECO mode may not offer sufficient power to cool in the current environment. • Check the fan is free of dust and is spinning freely. (NOTE: cooling is effected by the external ambient temperature.
16 litre compact fridge Warranty This CRISTAL appliance is guaranteed to be free from defects in parts and manufacture for 12 months from date of purchase, provided that the unit is used under the normal operating conditions shown within the manual. Please note: • Clarity Vision Group Ltd. will not accept any liability for damage or injury caused by improper use. • Clarity Vision Group Ltd.
Contact: Clarity Vision Group Ltd Unit 9 High March Industrial Estate, Daventry, Northamptonshire, NN11 4HB Rev 1.