User Manual

Using a “Manual” Setting While Pressure Cooking:

Although none of the buttons on Express Crock are labeled as “Manual” pressure, it is very easy to do.

If you have a pressure recipe that requires a manual setting – or if you simply want to pressure cook

using your own pressure setting and cook time – then select BEANS/CHILI and adjust the pressure

and cook time as desired.

All About “E” Notiﬁcation Codes and How to Resolve Them:

Your Express Crock has been designed to help you achieve just the right results for every meal. If

the Express Crock notices that something in the recipe or cooking cycle needs to be optimized at

any point, it will stop cooking and give you an “E” Notiﬁcation Code on the display screen. These “E”

Notiﬁcation Codes are very easy to resolve, and ensure that your meal gets cooked to perfection.

• E3 NOTIFICATION CODE – If you receive this code while using one of the pressure cooking

settings, then the lid probably did not close or seal correctly. To resolve, follow the steps below:

1. Rotate the Steam Release Valve to the “Release” position and wait for the unit

to de-pressurize.

2. Take off the lid and look underneath to make sure the Sealing Gasket (large rubber

ring) is properly secured to the underside of the lid.

3. If your recipe looks like it may need more liquid now that you have released some

of the steam after removing the lid, then add more, stir your ingredients, and reattach

the lid, making sure the Steam Release Valve is in the “Seal” position.

4. Unplug the unit for at least 5 seconds, and then re-plug it in and re-program your

cook settings to begin cooking.

Congratulations on receiving your new Crock-Pot

Express Crock Multi-Cooker!

To keep you as happy and informed about your Express Crock as possible, we have added some

additional helpful hints & tips below to guide you through the pressure cooking process.

A NOTE ABOUT PRESSURE COOKING

Pressure cookers generate steam in order to build pressure. Liquid is needed to create steam. So in order

for your Express Crock to build enough pressure to cook your meal, there needs to be enough liquid in

the pot to boil and generate steam. One cup – or 8 oz – of liquid (it can be water, chicken broth, etc.) is

usually enough liquid to successfully build pressure. Foods that expand during cooking (e.g., rice, beans,

dried vegetables, potatoes, carrots, etc.) should never go above the 1/2 mark in the Cooking Pot. If your

recipe is too thick or doesn’t have enough liquid in it, then you will receive an E6 Notiﬁcation Code during

the cooking cycle (more on this below). The amount of time the Multi-Cooker takes to gain pressure varies

according to humidity and water temperature, but average pressurization time is 13-15 minutes.

Note: Do not use the Quick Pressure Release Method when cooking foods with high liquid content, like soup,

stew, etc. For these, please use the Natural Release Method, waiting at least 10 minutes after cooking is

complete to rotate the Steam Release Valve.

PAGE 1
Congratulations on receiving your new Crock-Pot® Express Crock Multi-Cooker! To keep you as happy and informed about your Express Crock as possible, we have added some additional helpful hints & tips below to guide you through the pressure cooking process. A NOTE ABOUT PRESSURE COOKING Pressure cookers generate steam in order to build pressure. Liquid is needed to create steam.
PAGE 2
• E5 NOTIFICATION CODE – This code appears when either the lid or Steam Release Valve is being used incorrectly for a non-pressure cook setting. Please note that the lid should never be used when using the Brown/Sauté setting. When using the lid during the Slow Cook or Yogurt settings, the Steam Release Valve must be turned to the open or “Release” position.