Instruction manual

Sewing buttonholes
To find the proper stitch length, it is
recommendable to sew a sample buttonhole on
a piece of cloth.
Raise the presser foot (14) and the needle to
their highest position. Remove the presser foot
and attach the buttonhole foot in its place.
NOTE: Instructions for removing and
inserting the presser foot can be found
on page 9.
Mark on the fabric where the buttonhole is to be
sewed, as well as the desired length; use a
pencil or tailor's chalk.
When sewing very fine fabrics and synthetics,
reduce the pressure of the presser foot and sew
on a piece of paper to avoid any entanglement
of threads.
35
Presser foot . . . . . . . . . . . . . . . . . . buttonhole foot
Stitch length dial
. . . . . . . . . . . . . . . . . . . 0.2 to 0.5
o
1