Product Manual

ManualsBrandsCrommelins ManualsPetrol Drive UnitsRobin Drive Unit & 2" Submersible Pump, 6hp, C-Frame

Thank you very much for purchasing a CROMMELINS™ DRIVE UNIT.

This manual covers operation and maintenance of the CROMMELINS™ DRIVE UNIT.

This CROMMELINS™ DRIVE UNIT can be used in the agricultural, mining, construction,

hire industries and general use.

Please take a moment to familiarise yourself with the proper operation and maintenance

procedures in order to maximise the safe and efficient use of this product.

Keep this owner’s manual at hand, so that you can refer to it at anytime.

Due to constant efforts to improve our products, certain procedures and specifications

are subject to change without notice.

When ordering spare parts please have handy your products model number and serial

number. Record these numbers in the boxes below for future reference.

Please fill in the following blanks after checking the production number and serial

number on your product. (The location of these numbers, vary depending on product).

CONTENTS

Introduction & Contents

Safety & Components Diagram 3

Connecting Drive Pump or Vibrator Shaft 4

Maintenance, Transportation & Storage 5

Specification Chart 6

Trouble Shooting Guide 7

Drive Unit Parts List 8

SERIAL NO.

MODEL NO.

Summary of content (7 pages)

PAGE 1
Thank you very much for purchasing a CROMMELINS™ DRIVE UNIT. This manual covers operation and maintenance of the CROMMELINS™ DRIVE UNIT. This CROMMELINS™ DRIVE UNIT can be used in the agricultural, mining, construction, hire industries and general use. Please take a moment to familiarise yourself with the proper operation and maintenance procedures in order to maximise the safe and efficient use of this product. Keep this owner’s manual at hand, so that you can refer to it at anytime.
PAGE 2
SAFETY This manual contains important information on how to use the following drive unit models DU53, DU53D, DU53DS41, DU53BF, DU53EX17 and DU73 properly and safely. Please read through this manual before you attempt to operate the machine. Ensure safe operation, this drive unit is designed to give safe and dependable service if operated according to the instructions. Always make a pre-operation inspection before starting the engine.
PAGE 3
CONNECTING DRIVE PUMP OR VIBRATOR SHAFT Ensure that the connecting end is securely engaged and properly latched into the drive unit. BEFORE STARTING Check the engine in accordance with operation manual for engine. Check fuel and engine oil. Check bolts and screws for tightness and make sure all bolts and screws are securely tightened. Loose bolts and screws may cause damage to the unit. STARTING Open fuel tap. Set the speed control lever to the starting position.
PAGE 4
MAINTENANCE When assembling, lubricating, or adjusting any part of the machine, make sure to stop the engine and disconnect the spark plug wire. Service the engine according to the engine manufacturer’s specifications. Refer to the engine operation and maintenance manual. Maintenance: Every 8 hours or daily Check for loose bolts and nuts, retighten if necessary. Check and clean the air filter element, re-lube the element according to engine manufacturer’s recommendations.
PAGE 5
DRIVE UNITS SPECIFICATION CHART MODEL DU53 DU53D DU53DS41 Weight (kg) 32.0 49.0 61.0 Engine Make Subaru Subaru Subaru Engine 5.0hp EY20 5.4hp DY27 8.5hp DY41 Engine Features Recoil Start Recoil Start Electric Start Fuel Type Petrol Diesel Diesel Fuel Tank Capacity 3.8L 3.2L 4.5L Noise Level db@7m 69.0 74.0 78.
PAGE 6
TROUBLE SHOOTING GUIDE PROBLEM Engine won’t start CAUSE 1. Engine switch in OFF position 2. Throttle lever on/off switch in OFF position 3. No fuel in engine 4. Worn, fouled or dirty spark plug 5. Pressure build up in pump SOLUTION 1. Turn engine switch to ON position 2. Turn throttle lever to ON position 3. Fill fuel tank or turn on fuel supply 4. Replace with factory recommended spark plug 5. Squeeze trigger on spray wand to release pressure in hose line Units with Oil Alert System 1.
PAGE 7