Operation Manual

MAINTENANCE

Lubricate the flexible shaft assembly after every 40 hours of operation to prevent dry

spots that cause overheating. Remove the inner core and wipe clean. Coat core with

1/16” of lubricant. Do not over lubricate since this will shorten the life of the shaft.

Replace worn or broken casing to prevent damage to core and head.

Avoid sharp bends in flexible shaft, not only in operation but also when storing.

Do not use flexible shaft to pull drive unit.

Never install a new core in a kinked casing or a kinked core in a new casing. The parts

will be ruined instantly.

WARRANTY

Consult the CROMMELINS Machinery warranty leaflet (supplied with your new product)

for full details and a list of service dealers for this product, also available online at