User guide

#define NDIGO TRIGGER SOURCE A0 0x00000001
#define NDIGO TRIGGER SOURCE A1 0x00000002
#define NDIGO TRIGGER SOURCE B0 0x00000004
#define NDIGO TRIGGER SOURCE B1 0x00000008
#define NDIGO TRIGGER SOURCE C0 0x00000010
#define NDIGO TRIGGER SOURCE C1 0x00000020
#define NDIGO TRIGGER SOURCE D0 0x00000040
#define NDIGO TRIGGER SOURCE D1 0x00000080
#define NDIGO TRIGGER SOURCE TDC 0x00000100
#define NDIGO TRIGGER SOURCE GATE 0x00000200
#define NDIGO TRIGGER SOURCE BUS0 0x00000400
#define NDIGO TRIGGER SOURCE BUS1 0x00000800
#define NDIGO TRIGGER SOURCE BUS2 0x00001000
#define NDIGO TRIGGER SOURCE BUS3 0x00002000
#define NDIGO TRIGGER SOURCE AUTO 0x00004000
#define NDIGO TRIGGER SOURCE ONE 0x00008000
#define NDIGO TRIGGER SOURCE TDC PE 0x01000000
#define NDIGO TRIGGER SOURCE GATE PE 0x02000000
#define NDIGO TRIGGER SOURCE BUS0 PE 0x04000000
#define NDIGO TRIGGER SOURCE BUS1 PE 0x08000000
#define NDIGO TRIGGER SOURCE BUS2 PE 0x10000000
#define NDIGO TRIGGER SOURCE BUS3 PE 0x20000000
int gates
#define NDIGO TRIGGER GATE NONE 0x0000
#define NDIGO TRIGGER GATE 0 0x0001
#define NDIGO TRIGGER GATE 1 0x0002
#define NDIGO TRIGGER GATE 2 0x0004
#define NDIGO TRIGGER GATE 3 0x0008
double minimum free packets;
This parameter sets how many packets are supposed to fit into the on-board FIFO before a new
packet is recorded after the FIFO was full, i.e. a certain amount of free space in the FIFO is
demanded before a new packet is written after the FIFO was full. As a measure for the packet
length the gatelength set by the user is used. The on-board algorithm checks the free FIFO
cronologic GmbH & Co. KG 35 Ndigo5G User Guide