Outdoor Dinning Chair Set CO6270
PART LIST A B Back Panel 2 PCS C D Leg 4 PCS Seat Panel 2 PCS Bottom Frame 2 PCS HARDWARE LIST #1 #2 #3 1/4' x 1"L 1/4' x 1/2"L Long Bolt 6 PCS (Extra 1) Bolt 20 PCS (Extra 1) #4 Washer 26 PCS (Extra 1) 2 Allen Wrench 1 PC
Step 1. Lay back panel (part A) on a soft flat surface, such as carpet, as shown below. Attach seat panel (part B) to back panel (part A) using long bolts (part #1), bolts (part #2), washers (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. #4 B #2 #3 #1 #3 #1 #2 #3 #1 #3 #3 #1 #3 #2 #3 A #1 x3 #2 x2 #3 x5 #4 x1 Step 2. Attach legs (part C) to seat panel (part B) using bolts (part #2), washers (part #3) and allen wrench (part #4).
Step 3. Attach bottom frame (part D) to back panel (part A) and legs (part C) using bolts (part #2), washers (part #3) and allen wrench (part #4). NOTE: Please fully tighten all bolts at this time. B #3 #4 #2 #3 C #2 D #2 #3 #2 #3 C #2 #3 A Step 4. Carefully turn units upright. Repeat steps 1-3 to assemble remaining chair.