PART LIST Table Top Shelf Panel Side Panel Bottom Rail 1PC 1PC PCS PCS HARDWARE LIST 1/4" x 3/8" Bolt Allen Wrench 16 PCS (Extra 1) 1PC
Step 1. Lay down side panels {part C) on a flat, soft surface, such as carpet. Insert bottom rails (part D) into side panels (part C} using bolts (part #1) and Allen wrench (part #2). Note: Please do not fully tighten bolts until it is fully assembled. Step 2. Attach shelf panel (part B) on the L brackets of side panels (part C} using bolts (part #1) and Allen wrench (part #2). Note: Please do not fully tighten bolts until it is fully assembled.
Step 3. Carefully tum assembled unit upright. Insert table top (part A) into side panels (part C) using bolts (part #1) and Allen wrench {part #2). Note: Please fully tighten all bolts at this time.