Outdoor Loveseat CO6110
PART LIST A C B Back Panel 1 PC F Seat Panel 1 PC G E D Right Arm Panel 1 PC Left Arm Panel 1 PC Cover of Seat Cushion * 2 PCS H *Please note cushion covers will ship separately.
Step 1. Lay left arm panel (part D) down on a soft flat surface, such as carpet, as shown below. Attach back panel (part A) to left arm panel (part D) using long bolts (part #3), flat washers (part #4) and allen wrench (part #5). NOTE: Please do not fully tighten bolts until unit is fully assembled. A #5 #3 #4 D #3 #4 #5 x2 x2 x1 Step 2.
Step 3. Attach right arm panel (part C) to back panel (part A) and seat panel (part B) using short bolts (part #1), long bolts (part #3), flat washers (part #4) and allen wrench (part #5). NOTE: Please fully tighten all bolts at this time. A C B #4 #3 #5 #4 #1 #1 #3 #4 #5 #5 D Step 4. Insert core of seat cushion (part F) into cover of seat cushion (part E). lnsert core of back cushion (part H) into cover of back cushion (part G).
Step 5. Carefully turn unit upright and add cushions as shown below.
