Instructions / Assembly

12
Step 9. Put the flame glass (part B) into the fire bowl. Ensure flame glass (part B) is not
covering pilot housing, as shown below. Place lid (part A) over fire bowl. The lid
(part A) must be removed when burner is in use. Wait until the unit cools before
placing lid (part A) over fire bowl.
When the unit has cooled down COMPLETELY and NOT in use, put table cover
(part M) on the unit.
NOTE: Do not dump flame glass (part B) out of package. Carefully place flame glass
(part B) by hand to prevent dust from clogging burning.
A
B