Instructions / Assembly

Step 4. Lay top panel (part C) upside down on a soft flat surface. Attach assembled unit to

top panel (part C) using short bolts (part #1) and phillips head screwdriver.

NOTE: Please do not fully tighten bolts until unit is fully assembled.

Step 3. Line up pin hinge from door panel (part E) with the holes in left door leg (part I).

Attach door panel (E) to left door leg (part I) using bolt (part #2) and phillips head

screwdriver.

NOTE: Please fully tighten bolt at this time.

#2 x 1

#1 x 4