Instruction Manual Shelf Stereo System CR79

10
Clock Operation
Timer-Off Operation
Snooze Operation
Example: “set Timer - off for 8:15am”
A Press “MODE” to timer-off display mode.
B Press “CLK-ADJ” to enter to timer-off hour-
adjustment mode.
C Press “FF / FB” to set desired hour. (e.g.
12:00am 8:00am ).
D Press “CLK-ADJ” to enter to timer-off minute-
adjustment mode.
E Press “FF / FB” to set desired minute. (e.g.
8:00am 8:15am ).
F Press “CLK-ADJ” to return to timer-off display
mode with activation of Timer-off function.
A Press “TIMER” to deactivate (both icons flash)
or activate (only “Timer” flash ) Timer-off function.
If using the Timer-On function, you can also use the
Snooze function. Using the Snooze function will
allow you to temporarily turn off the Timer-On function
for 5 minutes.
A Press “SNOOZE” to turn off the system. After 5
minutes, the system will ON again automatically
Notes:
1) The function mode (CD/TUNER/AUX/TAPE) will
not be changed for above operation.
CD Player & Connecting Optional Equipment
Program
Track programming
A While CD is stopped, press “PROG” to enter
PROGRAM mode.
B Press “FF” or “FB” to select a desired track
number.
C Press “PROG” to save that track.
D Repeat above procedures to program additional
tracks.
E After end of program, press “PLAY” to start
playback.
Notes: .
1) To program, the CD must be stopped.
2) The same track can be programmed more than
once.
Programmed track revision
A While CD is stopped, press “PROG” button to
check the sequence of programmed tracks.
B After checking, just press “PLAY” to start play.
Notes: 1) Clear programming process by using of
“STOP”.
13
Add or Change program track
A While CD is stopped, press “PROG” repeatedly
to reach the program number that you want to
change.
B Press “FF” or “FB” to desire track.
C Press “PROG” to save.
D Repeat above procedures to add or change
program track.
Notes:
1) It can work with “INTRO”, “REPEAT” during
play.
2) The programmed contents will not clear except
press “STOP” twice or press “RANDOM”.
enter to prog mode
CD stopped
select desired
track number
save & 2nd
prog initial
press “FF”or “FB”
press “PROG”
press “PROG”
31-track programed
start to play
playing
press “PLAY”
press “MODE” to TIMER-OFF
SETTING mode
enter to
HOUR-ADJ mode
enter to
MINUTE-ADJ
mode
end of Timer-off
adj.
press “CLK-ADJ”
press “FF”/”FB” to
target time and
then “CLK-ADJ”
press “FF”/”FB” to
target time and
then “CLK-ADJ”
Timer -off function on actived
deactivate
Timer-off function
press “TIMER”
CD playing due
to Timer-on
Power- on
Power-offed
press “SNOOZE”
After 5-min system
on and then start
to play