CR83 The Centurion Instruction Manual F.SKIP B.SKIP PROG .
WARRANTY Crosley Radio Products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale to the original purchaser. Should the unit fail under normal usage during the 90 day warranty period, a request for RETURN AUTHORIZATION (R.A.) must be made by the original customer before returning the unit. Call Crosley Radio customer service for Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to Friday.
IMPORTANT SAFETY INSTRUCTION General PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT Troubleshooting There is no Power 1 Make sure the radio is plugged in correctly. 2 Check to see that the power button is pushed in. There is no Sound 1 Check the volume level by turning the volume knob. 2 Make sure the ext./int. switch on back of radio is on int. (unless you are using external speakers, in which case it should be on ext.
WARNING: Connecting Optional Equipment TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION External Speakers 1 This radio is equipped with external speaker outputs. 1 You can connect your radio to different sources using the auxiliary outputs. 2 The speaker jacks for external speakers are located on the back of the radio.
CD Operation Welcome Repeat Playback 1 2 3 To repeat a single track, choose the track that you want to repeat, then press the PLAY/PAUSE BUTTON (14) to start the track. Press the REPEAT BUTTON (11) once to repeat this track. The REPEAT INDICATOR (10) will flash. To repeat all tracks, press the PLAY/PAUSE BUTTON (14) to start the CD. Press the REPEAT BUTTON (11) twice to repeat all tracks. Once the CD ends, it will star over again from the beginning of the CD. The REPEAT INDICATOR (10) will remain on.
Control Locators CD Operation Unit Controls 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Speakers Tuner Dial Forward Skip Button Backward Skip Button Program Indicator Program Button AM/FM Button Function Switch Volume Knob Repeat Indicator Repeat Button Stop Button Play/Pause Indicator Play/Pause Button Open/Close Button Power Button Tuning Knob Headphone Jack CD Drawer Cassette Eject / Fast Forward Cassette Door Playing A CD 1 3 2 10 4 Slide the FUNCTION SWITCH (8) to the CD position.
Radio Operation 1 Slide the FUNCTION SWITCH (8) to the RADIO position. 2 Press the AM/FM BUTTON (7) to the desired tuning band (AM or FM ). 3 Select the desired radio station by rotating TUNING KNOB (17). 4 Adjust the VOLUME KNOB (9) to the desired sound level. Antenna: for FM reception, the unit is provided with a FM WIRE ANTENNA (34) , move the wire until the reception is clear and with no interferences. For AM reception, the unit is provided with a directional build-in ferrite antenna.
Getting Started Unpacking 1 Remove packing materials from unit. Power Source 1 Unwind the AC POWER CORD (35) at the back of the unit and connect it to a power outlet. 2 Plug A/C cord into appropriate outlet. Turntable Features Note: Save all packing materials. 2 Remove plastic bag covering unit. 3 Remove plastic safety cover from A/C POWER CORD. 4 Remove tie from A/C Cord and untie ANTENNA WIRE (34) on the back of Radio. 5 Open lid and remove shipping material from turntable.
