Operating instructions

This manual covers many models and not all cycles, options, or features listed are available on

every modek Console shown above for reference only, Your model may differ,

Cycle Selection, continued

Auto Dry Cycles

Auto Dry cyclestake the guesswork out of selecting the

correct drying time for each load. Moisture sensing bars at

the back of the dryer drum sense the moisture level of the

load as it tumbles through the heated air. With Auto Dry

cycles, the load will automatically be dried at the selected

temperature to the desired dryness level. Auto Dry cycles

save time and energy and protect fabrics.

The estimated drying time will be displayed for about 5

minutes. Then the outside of the display will light up in a

circular track to indicate the drying time is automatically

being determined by the sensors. When the load has reached

the selected dryness level, it will continue to tumble during

a cool clown period. This helps reduce wrinkling and makes

items easier to handle during unloading.

Drying time varies depending on size and dampness of

load and fabric type. If the load is too small or almost dry,

the moisture sensing bars may not detect enough moisture

to continue the cycle and the cycle may end after a few

minutes. If this occurs, select a Timed Dry cycle.

Room temperature and humidity, type of installation and

electrical voltage or gas pressure can also affect drying time.

Towels

Select this Auto Dry cycle for towel loads.

Normal

Select this Auto Dry cycle for cotton items.

Perm Press

Select this Auto Dry cycle to dry cottons and blends with a

no-iron finish.

Delicate

Select this Auto Dry cycle for knits and delicate items.

Timed Dry Cycles

- FIRE HAZARD - To avoid fire hazard, do not

use heat to dry items containing feathers or down, foam rub-

ber, plastics similarly textured, rubber-like materials. Use the

Timed Dry cycle and the Air Fluff/No Heat setting.

BuT

Select this cycle to dry a comforter, blanket, sleeping bag or