Corp. Side by Side Refrigerator Use & Care Manual

ELECTRONIC TEMPERATURE CONTROLS

ALLOWING COOLING TIME BEFORE USE

To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least 8 to 12 hours before placing food inside. During

this cooling period, you do not need to adjust the controls, which are preset at the factory.

SETTING COOLING TEMPERATURES

Your refrigerator comes with a state-of-the-art electronic digital control system. The system’s control panel is located at the top of the the fresh

food compartment.

The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and fresh food

compartments. The models with a 2-digit temperature display are for reference only, and do not display the current accurate compartment

temperature. Should you desire to see what the current accurate temperature is, place a separate thermometer inside the freezer or fresh

food compartment in the desired location.

(Single Digit Display - Features may vary.)

NONO

TETE

The advanced electronic control system in your refrigerator includes additional display modes that service professionals

can use to rapidly diagnose performance issues.

To adjust the temperature to a higher or lower setting, press the

Up (Cold) or Down (Colder) button closest to the display. The

first time you press the button, the display shows current

setting you entered. Each press of the button after that

changes the setting by one.

The display shows your new setting momentarily, then changes

back to the current temperature.