C100 TURNTABLE OPERATING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions carefully. Keep these instructions for later reference. Heed all warnings. Follow all instructions. Do not use the device near water. Clean only with a dry cloth. Do not block any ventilation openings. Always ensure a sufficient ventilation. Install in accordance with the manufacturer’s instructions. 8.
FEATURES STANDBY This device is provided with an automatic standby mode which is automatically activated after 20 minutes of non-use. In standby mode, the power consumption of the turntable is reduced to less than 0.5 W to avoid unnecessary power consumption. The standby mode will be interrupted automatically as soon as the START/STOP button is pressed.
PART NAMES and FUNCTIONS 17 17 16 1 15 14 2 13 12 3 11 4 10 5 7 6 18 19 20 8 9 21 1. 45-rpm Adaptor This adapter allows you to play standard 7” EP vinyl records with large center holes. Place the adapter on the CENTER SPINDLE 7" records. 2. Turntable Platter This platter connects directly to the center spindle. The platter and center spindle holds a vinyl record perfectly center. The platter also spins the record at a consistent speed. 3.
PART NAMES and FUNCTIONS 7. Headshell The included HEADSHELL is used to connect your stylus with the tonearm. 8. Speed Select Button The button is used to switch the platter rotation between 33 or 45 RPM. When the 33 RPM is engaged, the red LED will light up; when the 45 RPM is engaged, the green LED will light up. 9. Pairing Button/ Indicator Enables/disables the BLUETOOTH function. Press for about 2 seconds and release to turn on your turntable's pairing mode.
ASSEMBLY 1. Remove the main unit with the packing from the box and remove the packing. 2. Set the 45-rpm adaptor on the main unit. 3. Set the turntable platter onto the center spindle. 4. Set the slip mat on the platter. 5. Installation of cartridge: When installing a cartridge, refer to the operating instructions of that cartridge. During installation, attach the stylus protector to guard the stylus tip from damage. (a) Connect the lead wires to the cartridge terminals.
CONNECTIONS You can connect to a speaker, etc. via Bluetooth Wireless Connection or RCA audio cable. BLUETOOTH WIRELESS CONNECTION When using Bluetooth, refer to “Bluetooth Function” paragraph. WIRED CONNECTION Before connecting the unit it is advised that you also consult your current equipment instruction manual. 1. Be sure to turn off the audio device, such as a stereo system or an amplifier, before connection. Be sure to make all the connections before you connect the power adaptor to a power outlet.
BLUETOOTH FUNCTION BLUETOOTH function Very Important • The shakes from pressing the PAIRING button while playing a vinyl record may cause the stylus to skip. We strongly recommend connecting to BLUETOOTH before playing a vinyl record. • Do not connect to headphones which you cannot adjust the volume. Audio tracks may be played at very loud volumes.
QUICK-START 1. Turn the On/Off Switch clockwise to turn on the power, the speed indicator and the strobe-illuminator, which is located beneath the On/Off switch, will light up. 2. Place a record on the slip mat. When playing a 45-rpm record with a large center hole, place the 45-rpm adapter on the center spindle. 3. Set the speed to match the record. 4. Remove the stylus protector from the Headshell Stylus, release the Tonearm clamp. 5. Set the tonearm lever to the up position. 6.
SPECIFICATIONS 1. GENERAL SECTION: Power Type Adapter + AC plug Power Input range AC 100V~240V, 50/60Hz Power Output DC 12V/0.5A Power Consumption 2.4W Standby Power Consumption <0.45W Dimensions 450 (W) x 350 (D) x 145 (H) mm Weight 4 Kg (Tentative) 2. STANDARD TEST CONDITION: Ambient Temperature 23 +/- 2℃ Relative Humidity 65% +/- 5% NOTE: Measurements can be carried out between 5 ℃ to 35 ℃ and 45% to 85% relative humidity. 3.
SPECIFICATIONS 7. Output Sensitivity: (Phono Cartridge Input At 1KHz 5cm/sec (CD-4005).) Typical Limited LINE: 10K OHM / -15.1dBV(176mV) ± 1dB ± 1.5dB Phono: 47K OHM / -50.7dBV(2.9mV) ± 1dB ± 1.5dB BT (TX): -20.5dBFS(-24.1dBV) ± 1dB ± 1.5dB 8. Frequency Response: (Reference Input From VP-7727D) Typical Line: 20 - 20K Hz +1/-1.5dB Limited +2/-3dB Input At -50.7dBV 9. THD + N: (Reference Input 1KHz From VP-7727D) Typical Limited Line 0.015% 0.07% Input At -50.7dBV 11.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
