Operating Instructions

7. Output Sensitivity: (Phono Cartridge Input At 1KHz 5cm/sec (CD-4005).)
Typical Limited
LINE: 10K OHM / -15.1dBV(176mV) ± 1dB ± 1.5dB
Phono: 47K OHM / -50.7dBV(2.9mV) ± 1dB ± 1.5dB
BT (TX): -20.5dBFS(-24.1dBV) ± 1dB ± 1.5dB
8. Frequency Response: (Reference Input From VP-7727D)
Typical Limited
Line: 20 - 20K Hz +1/-1.5dB +2/-3dB Input At -50.7dBV
9. THD + N: (Reference Input 1KHz From VP-7727D)
Typical Limited
Line 0.015% 0.07% Input At -50.7dBV
11. Maximum Intput: (Reference Input 1KHz From VP-7727D)
adjust input 1KHz level to output level less than 1% T.H.D with A-w/20KHz LPF
Typical Limited
Line -30.7dBV -31.7dBV
11. S/N Ratio: (Phono Cartridge Input At DIN-B (SS-4242) )
Typical Limited
Line & Phono >65dB >60dB
12. L&R Channel Separation: (Phono Cartridge Input At 1KHz 5cm/sec (CD-4005).)
Typical Limited
Line & Phono >20dB >15dB
13. L&R Channel Balance: (Phono Cartridge Input At 1KHz 5cm/sec (CD-4005).)
Typical Limited
Line & Phono <2dB <2.5dB
14. Wow and Flutter: (Phono Cartridge Input At 3KHz 5cm/sec (CD-4005).)
Typical Limited
Line & Phono <0.08% <0.15%
15. Speed Tolerance: (Phono Cartridge Input At 3KHz 5cm/sec (CD-4005).)
Typical Limited
Line & Phono ±0.5% +3 / -2%
16. Speed Pitch ADJ: (Phono Cartridge Input At 3KHz 5cm/sec (CD-4005).)
Typical Limited
Line & Phono ±11% ±10%
17. ACCESSORIES SUPPLIED:
 Instruction manual x 1  45 rpm adaptor x 1  Counter weight x 1
 Dust cover x 1  Platter + Belt x 1  Slipmat x 1
 2P RCA Cord x 1  Power Adaptor (with UL/PSE transfer plug)
 Headshell assembly x 1 (included Headshell, Cartridge, Stylus)
18. NOTES
(1) The specifications are subject to change to any improvement by negotiations in advance.
(2) The parts are subject to change to any improvement within the range of the specifications.
SPECIFICATIONS