Operating Instructions

Very Important
• The shakes from pressing the PAIRING button while playing a vinyl record may cause the stylus to skip.
We strongly recommend connecting to BLUETOOTH before playing a vinyl record.
• Do not connect to headphones which you cannot adjust the volume.
Audio tracks may be played at very loud volumes.
Pairing Devices to Your Turntable
When you first connect your turntable to a playback device that supports BLUETOOTH wireless technology,
you must pair it with the device.
The turntable can register information of up to 8 paired devices, without having to pair the next or subsequent
times you connect the device to the turntable.
1. Place the playback device that supports BLUETOOTH wireless technology to which you want to connect,
as close to your turntable as possible.
2. Press and hold your turntable's PAIRING button for about 2 seconds, and then release it. The BLUETOOTH
indicator rapidly flashes blue.
3. Turn on the pairing mode for the playback device that supports BLUETOOTH wireless technology, to which
you want to connect.
The above illustration is one example of a device that is connecting.
For how to turn on the pairing mode for the device to which you want to connect, refer to the user's instructions
supplied with the device.
The BLUETOOTH indicator stops flashing blue and remains lit when pairing is complete.
Note
If you are only using the BLUETOOTH connection and not connecting your turntable to another device using
the audio cable, set the OUTPUT SELECT switch on the back of the turntable to LINE to use the turntable.
Tip
• Once you have paired your turntable and device, you can connect to the paired device simply by giving a
short press to the BLUETOOTH button/PAIRING button to enable your turntable's BLUETOOTH function.
You can also connect to the paired device and play vinyl records by pressing the START button on the front
of the turntable when the BLUETOOTH indicator is lit orange (in standby).
• Press the BLUETOOTH button/ PAIRING button to disengage from the BLUETOOTH connection. The
BLUETOOTH indicator turns off.
• You can register information for a maximum of 8 devices paired to your turntable.
You can delete all information for paired devices by pressing and holding the BLUETOOTH button/ PAIRING
button for about 10 seconds, and then releasing it.
If You Cannot Pair Devices
• If there are playback devices, which support BLUETOOTH wireless technology nearby, that have the
BLUETOOTH function enabled, but some of them are not the device with which you want to pair, disable
their BLUETOOTH function and try pairing again.
• With the pairing operation, the device with which you do not want to pair may be turned on and connected to
the turntable automatically. If this occurs, change the device's setting not to turn on by the BLUETOOTH
connection, turn off the device, and try pairing again.
• You cannot pair your turntable with smartphones, TVs, or computers. The turntable can use the BLUETOOTH
function to send data to playback devices that support BLUETOOTH wireless technology; however, because
the turntable cannot receive data from smartphones, TVs, or computers, the turntable cannot pair with them.
BLUETOOTH FUNCTION
BLUETOOTH function