C200A C200 Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Read these instructions carefully. 2. Keep these instructions for later reference. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the device near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Always ensure a sufficient ventilation. Install in accordance with the manufacturer’s instructions. 8.
English − Caution Marking and rating plate was located at rear enclosure of the apparatus. − When the mains plug or appliance coupler is used as disconnect device, it shall remain readily operable. − The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.; Minimum distances 10cm around the apparatus for sufficient ventilation. − No naked flame sources, such as lighted candles, should be placed on the apparatus.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: • Turntable • Turntable Lid • Turntable Platter • Turntable slip mat • Headshell • 45 RPM adapter • Tonearm Counterweight • Power adaptor Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 45 RPM Adapter 2. Turntable Platter 3. Turntable Spindle 4. Strobe Dots 5. Power Knob 6. Start/Stop Button 7. Hinges 8. Spare Headshell Holder 9. Tonearm Counterweight 10. Downforce Scale Dial 11. Anti-Skate Adjustment Dial 12. Tonearm Lift 13. Cue Lever 14. Tonearm Rest 15. Hold Down Clip 16. Tonearm 17. Pitch Control 18. Headshell Locking Ring 19. Headshell 20. Speed Selector 21. Phono/Line Jacks 22. Grounding Terminal 23. Phone/Line Switch 24.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Install the turntable lid to the hinges. 3. Remove the tie-wrap that is holding the tonearm. 4. Install the turntable platter. 5. Place the slip mat on top of the turntable platter. 6. Insert the Headshell into the socket at the front of the tonearm, and then turn the Headshell Locking Ring counter-clockwise.
English Phono/Line Switch For increased flexibility of use, this unit has a built-in stereo phono pre-amplifier. If you prefer to use the phono input of your stereo system or your standalone phono pre-amplifier, set the Phono/Line switch to the PHONO position. Otherwise, please set it to LINE position and make connection to the AUX input or other high-level input on your stereo system.
English Turntable Operation 1. 2. 3. 4. Turn the Power Knob clockwise to turn on the power. Set the Speed Switch accordingly. Place the record on the turntable. Use the 45 RPM Adapter if necessary. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 5. Press the Start/Stop Button to start the turntable platter’s rotation. 6. Release the tonearm Hold Down Clip.
English Pitch Control Adjustment • When the platter is spinning, observe the strobe dots on the edge of the platter. As illuminated by the light coming from the strobe illuminator, if the appropriate row of strobe dots appears to be stationary, the platter is spinning at the precise rated speed. • If the dots appear to be moving to the right, the platter is spinning below rated speed; if they appear to be moving to the left, the platter is spinning above rated speed.
English Cartridge Replacement 1. Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the replacement process. 2. Turn the headshell locking ring clockwise to release the headshell and remove it from the tonearm. 3. Carefully remove the wire leads from the original cartridge 4. Loosen the two screws on the headshell that are securing the cartridge and then remove the original cartridge. 5. Mount the new cartridge to the headshell and tighten it lightly.
English Troubleshooting There is no power • No power at the power outlet. • To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, turn off the power and turn it on again. Power is on, but the platter does not turn • Turntable mode is not selected.
