Manual

4. Attach window-lock bracket to window sash with #8 x 3/4"
round-head screw to secure window in place.
A .........................[H
B
A. Upper window sash
B. Window-lock bracket
Option 2--Plaster wall with no molding
If the plastered wall is to be flush with the cabinet and no molding
is used, the wood frame must be set 1/2"(13 mm) into the inside
wall.
AB C
Electrica! Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or eJectrical shock.
5. Plug into a grounded 3 prong outlet.
6. Press RESET on the power supply cord plug.
Option 1 --Wood, metal or plastic molding
When using a wood, metal or plastic molding, the wood frame
should line up with inside wall as shown.
ABC
A. Molding C. Wood frame
B. Inside wall D.Louvers
A. Plastered wall C. Wood frame
B. Inside wall D. Louvers
Installing wood frame
1. Construct wood frame. See "Location Requirements" for
dimensions.
2. Measure outside width and height of frame to determine wall
opening dimensions.
3. Cut opening through the wall. Remove and save insulation.
NOTES:
• Dimension for depth depends on wall thickness and type
of molding.
• Do not block louvers in air conditioner cabinet.
• Use 1" (2.5 cm) or heavier lumber for wood frame.
14 A -€
A. Outside width
B. Outside height
C. Depth
4. Apply wood preservative to the outside exposed surface.
5. Insert the frame in the wall opening. Square and level frame.
6. Attach frame securely to the wall.
11