Manual

7. Place a 3/4"(2 cm) thick by 2" (5 cm) wide wood strip on the

bottom of the opening against the inside edge.

A. 17¼" (43.8 cm)

B. 2" (5 cm) wide

C. ¾" (2 cm) thick

D. Indoor side of wail opening

Center the tray back in the opening and align it with the inside

edge of the opening. Using the 2 inside screw holes in the

tray back, mark screw locations for mounting the

SMART-MOUNT TM tray.

A. Flush with inside wall

1. To assemble the tray frame, insert tab on tray back into slot

on tray side. Check to see that the tab is engaged and the

2 pieces are aligned. Insert 2 - #8 - 18 x 1/4"hex-head screws

to secure.

2. Repeat with other tray side.

A. Tray back

B. #8 - 18 x _" hex-head screws

C. Tray side

A. Inside screw holes

B. Indoor side of wall opening

Remove the tray back. Using these marks, drill %2" pilot holes

approximately 11/2'' (3.8 cm) deep.