Manual

Toselectthefanspeed(inCool,FanOnlyor PowerSaver
modeonly):
Press TURBO, HIGH or LOW.
To raise the temperature:
Press the plus button. Room indicator light on air conditioner will
turn off, and Set indicator light on air conditioner will turn on.
Display on air conditioner shows the Temperature control setting.
Each time you press or hold the plus button, the temperature will
increase 1° until it reaches 86°F (30°C).
NOTE: After 3 seconds, Set indicator light on air conditioner will
turn off, and Room indicator light on air conditioner will turn on.
Display on air conditioner will show the current room
temperature.
To lower the temperature:
Press the minus button. Room indicator light on air conditioner
will turn off, and Set indicator light on air conditioner will turn on.
Display on air conditioner shows the Temperature control setting.
Each time you press or hold the minus button, the temperature
will decrease 1° until it reaches 64°F (18°C).
NOTE: After 3 seconds, Set indicator light on air conditioner will
turn off, and Room indicator light on air conditioner will turn on.
Display on air conditioner will show the current room
temperature.
To set the Timer for a 1 - to 24-hour delay until the air
conditioner turns off (the air conditioner must be On}:
1. Press TIMER. Timer indicator light on air conditioner will
flash. Hour indicator light on air conditioner will turn on, and
display on air conditioner will show remaining hours before air
conditioner will turn off.
TIMER
2,
3.
Press the plus or minus button to change delay time (1 to
24 hours).
Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Hour indicator light on air
conditioner will turn off, and Room indicator light on air
conditioner will turn on. Display on air conditioner will show
the current room temperature.
To set Timer to turn on air conditioner, keeping previous
settings:
1. Turn off air conditioner.
2. Press TIMER. Timer indicator light on air conditioner will
flash. Hour indicator light on air conditioner will turn on, and
display on air conditioner will show remaining hours before air
conditioner will turn off.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4,
Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Hour indicator light on air
conditioner will turn off, and Room indicator light on air
conditioner will turn on. Display on air conditioner will show
the current room temperature.
To set Timer to turn on air conditioner, changing the
previous settings:
1. Turn on air conditioner.
2. Adjust Mode to Auto Cool, Cool, Fan Only, or Power Saver.
NOTE: For Auto Cool mode, go to Step 4.
3. For Cool, Fan Only or Power Saver mode, adjust Fan Speed
to Turbo, High or Low.
4. Adjust temperature between 64°F (18°C) and 86°F (30°C).
5. Wait 3 seconds before turning off air conditioner.
6. Press TIMER. Timer indicator light on air conditioner will
flash. Hour indicator light on air conditioner will turn on, and
display on air conditioner will show remaining hours before air
conditioner will turn on.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Hour indicator light on air
conditioner will turn off, and Room indicator light on air
conditioner will turn on. Display on air conditioner will show
current room temperature.
......................
Models without Power Saver
FAN
Waitthee mrites
hefore re_l;_fiing
(
PEED
Turbo
C001
TEMPERATURE
Cooler Warmer
I
Models with Power Saver
Cool
LPoweT
ISaveT
Low
Cool
TEMPERATURE
Cooler Warmer
I
5 3
1. Remove clear protective film from front panel badge (on
some models).
2. Set exhaust control. See "Exhaust Control (on some
models)."
3. Select the fan speed. See "Fan Speed."
4. Select temperature. See "Temperature."
19