Manual

Install SMART-MOUNT '_Tray Assembly in window
1. From inside, place SMART-MOUNT TM tray, support legs facing
down, in the window. Match the holes in tray side with the
predrilled holes in windowsill.
2. Using 2 - #10 - 12 x 11/2"slot-head wood screws, secure the
tray frame to the window.
Install side curtains
NOTE: Attach curtains to unit before placing unit in window.
1. Insert curtain into curtain frame. Make sure curtain end locks
into curtain frame.
A. #10 - 12 x 1 _" slot-head wood screws
NOTE: If the exterior of building can be damaged by support
legs, place a board between the wall and support legs.
3. With tray center pushed away from the windowsill, place a
level on the angled edge of tray side. Be sure level is against
notch on tray side. Adjust SMART-MOUNT TM tray until bubble
indicates the tray is level.
2. Push curtain in all the way.
3. Pull curtain toward open end of curtain frame.
A. Place level on angled edge against notch on tray side.
4. Tighten the hex nut just enough to hold tray center in place.
5. Repeat with other side.
6. Tighten hex nuts securely with 7_6"wrench.
4=
Insert top and then bottom of right-hand curtain frame in top
and bottom curtain guides on air conditioner.