Manual

Topview
6. While the right-hand curtain is still extended, insert screws
into top and bottom slots of curtain. Using #8 x %" pan-head
screws, screw curtain to the top and bottom holes in air
conditioner cabinet.
7. Slide curtain housing into guides as far as it will go.
8. Repeat above steps for left-hand curtain.
• Handle air conditioner with care.
• Be sure your air conditioner does not fall out of the opening
during installation or removal.
• Do not block the louvers on the front panel.
• Do not block the louvers on the outside of the air conditioner.
Bottom view
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
1. Put air conditioner on SMART-MOUNT TM tray. Check that feet
on bottom of air conditioner are behind and against back side
of windowsill. Lower window sash.
5.
Extend right-hand curtain outward so you may insert the first
screw through the middle hole of the curtain. Using a #8 x %"
pan-head screw, screw curtain to middle hole in air
conditioner cabinet.
NOTE: This screw is required to correctly attach curtain (top
to bottom) to the air conditioner cabinet.
I
m
A
A. #8 x _" pan-head screw
A ¸¸¸
2.
A. Window sash
B. Feet on bottom of air conditioner
behind back side of windowsill
If window sash does not close flush against rear
surface of top channel, remove air conditioner and
adjust SMART-MOUNT TM tray until window sash closes
flush against rear surface of top channel.