Manual

Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETTING:
te.q#dmer F auto =
0 hireed
Io
ON43FF A FAN SPEED
PRESS _ TO PAISE
PRESS V TO LOWER
filter
reset
s_eep
YOU WILL SEE:
temp/ttmer
F auto =
hi filter
reed wset
Io
V ON-OFF A FAN SPEED sleep
Note: Tap or hold either up ( A ) or down ( V ) button until
the desired temperature is seen on the display. This tempe-
rature will be automatically maintained anywhere between
60 °F (16 °C) and 90 °F (32 °C). If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO AD3UST FAN SPEEDS:
temp/timer
F auto =
hi filter
med reset
/o
V ON-OFF A FAN SPEED sleep
\\
DO THIS:
PRESS TO SELECT
YOU WILL SEE:
romp/timer
F auto
hi filter
med
Io = reset
V ON-OFF A FAN SPEED s_eep
TO USE AUTO FAN FEATURE:
terr_p/ttmer
F auto
hi filter
reed reset
Io
V ON-OFF A FAN SPEED sleep
I °°THIS=I
PRESS FAN BUTTON,
CHOOSE AUTO
YOU WILL SEE:
temp_imer
F auto
hi filter
reed reset
Io
V ON-OFF A FAN SPEED sleep
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed,
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adiust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.