User guide

Playing MP3 CDs (Continued from page 10)

Pre UP and Pre Down: (MP3 only) Use the Pre Up and Pre Down buttons to skip up or

down to the next album during MP3 CD play. Album selection can be made in play,

pause or stop mode.

Find/ESP: This function allows you to search by track name or album name and works

for MP3 only. To search by track name - In stop mode, press the Find/ESP button. Next

press the Skip+ or Skip- button to select the letter (A-Z) that matches the first letter of the

track name. When you have located the track that you want to play, press and hold the

skip+ or skip- button again for 1 - 2 seconds until the selected track letter starts flashing.

Next, press play/pause to begin playing the selected track. To search by album name - In

stop mode, press Find/ESP twice until ALBUM is displayed on the LCD screen. Press the

skip+ or skip- button to select an album. Next, press and hold skip+ or skip- for 1-2

seconds to enter the album. ALBUM will disappear from the LCD screen. Now press

skip+ or skip- to choose a track from the selected album. Press play/pause to play your

chosen selection. Note: If there are files in the root directory of your MP3 files, the LCD

display will show ROOT. Press and hold the skip+ or skip- button for 2 seconds until

ROOT disappears from the LCD screen. Next, search the files in the root directory by

pressing skip+ or skip-. Press the play/pause button to play your chosen selection.

To shut off jukebox from MP3 CD mode: Press stop, stand by, and then power.

Step-by-Step Instructions – Using the AM/FM Radio

The Crosley CR12-1 is equipped with an AM/FM radio with digital tuner. Connect the

external FM antenna as shown on page three. Press the yellow power button on the right

side of the front control panel. Next, press the stand by button on the front control panel.

The LCD screen will light up and greet you with HELLO. The jukebox should now be in

FM mode. If it is not, press function repeatedly until you see TUNER on the LCD. You

should now be on the FM band. To switch to AM press the band button located to the

left of the LCD display. Repeatedly press band to toggle between AM and FM mode.

With the tuner set to FM, press skip+ or skip- to search for stations. You can press and

hold either button for less than one second to automatically seek the first station with a

strong signal. However the auto-seek will miss many of the weaker stations. To

manually search for stations, repeatedly press and release either the skip+ or skip- button.

For FM tuning, ((ST)) will display on the LCD screen when you are receiving a stereo

signal. Occasionally you may find FM stations where the signal is too weak to allow

good stereo reception. If you notice static or hissing due to a weak signal, try switching

to mono reception by pressing the MO./ST. button on the remote. Use the volume

up/down buttons to set the volume to a comfortable listening level.

Mute: Press mute to silence the sound. Press mute again to recover previous audio level.

BBS: Turn on BBS for an enhanced base sound effect. Press the BBS button. The LCD

will display whether BBS is on or off. Press the button again to turn the feature on or off.

EQ: Press EQ repeatedly to select PASS, CLASSIC, ROCK, POP or JAZZ. Choose the

selection that sounds best for the type of music you are playing.