User guide

7
Quick Start Guide to Control Functions (Continued from page 6)
To program preset AM and FM radio stations: Press the function button to switch to
TUNER mode. Then press the band button to select either the AM or FM wave band.
Press skip+ or skip- to locate stations to save. You can press and hold either button for
less than one second to automatically seek the first station with a strong signal. However
the auto-seek will miss many of the weaker stations. To manually search for stations,
repeatedly press and release either the skip+ or skip- button. For FM tuning, ((ST)) will
display on the LCD screen when you are receiving a stereo signal. When you have
selected the first station that you want to save, press the program button. You will see
“01” start to flash at the top center of the LCD screen and Memory will be shown at the
bottom of the screen. The current preset number will be displayed for selection. If you
wish to store the radio station to another preset number, press the Pre Up or Pre Down
button to select the preset number. Next press the program button again to store the
preset station to memory. Repeat the steps above to store additional stations. You can
store up to 10 AM and 10 FM preset stations. To browse your list of saved stations,
repeatedly press the pre up or pre down button while in AM or FM mode. Note: During
programming, if no button is pressed within 5 seconds, the system will exit the program
mode automatically. Special Note: Pressing the yellow power button shuts off power to
the jukebox and will cause your saved station list to be deleted. To preserve your saved
list of pre set stations, press the stand by button to put the jukebox into hibernation mode
when you are finished listening to the radio.
Photo at left shows a view
of the LCD screen while
programming preset radio
stations to the FM band. 3
stations have been saved.
Pre UP and Pre Down: Use the Pre Up and Pre Down buttons to skip up or down to the
next album during MP3 CD play. Album selection can be made in play, pause or stop
mode. The Pre Up and Pre down buttons are also used to select the preset number (1- 10)
during the programming of preset radio stations and to return to your preset stations after
they are saved. See the section above titled “To program preset AM and FM radio
stations” for more information.
Skip+ and Skip-: In CD mode, use the skip+ and skip- buttons to move forward to the
next track or return to a previous track. While in the AM or FM radio mode, use the
skip+ and skip- to move up or down the broadcast band to search for and select stations.
Play/Pause: In CD stop mode, press play/pause to begin playing a CD. In CD play
mode, press play/pause to pause playing of the CD.
Stop: Stops CD play.
Open/Close: In CD stop mode, press to open or close the CD drawer.