User guide

8
Quick Start Guide to Using The Remote Control
Note: To use the remote, you must first power up the jukebox by pressing the yellow
power button on the front control panel of the jukebox.
Power: Press power to go into or return
from stand by mode.
Function: Press repeatedly to select
auxiliary, CD or tuner mode.
AM/FM: Press repeatedly to select AM
or FM broadcast band.
Aux: Press to switch to auxiliary mode.
Mute: Press mute to silence the sound.
Press mute again to recover previous
audio level.
Find/ESP: In MP3 CD play, use the
Find/ESP function to search by track or
album name. .
MO/ST: Press to select mono or stereo
in FM radio mode.
EQ: Press EQ repeatedly to select PASS,
CLASSIC, ROCK, POP or JAZZ. Choose the
selection that sounds best for the type of
music you are playing.
BBS: Press repeatedly to turn on/off the BBS
enhanced bass sound effect feature.
Volume: Use the volume up/down buttons to
set volume to a comfortable listening level.
Preset: Press preset up/down to scroll through
and select pre set AM and FM radio stations
and to move up or down to the next album in
MP3 CD play.
Scan/Skip: In CD mode, press repeatedly to
move forward to or return to a previous track.
While in the AM or FM radio mode, use to
search for and select stations.
Repeat: In CD mode, press once to repeat a
track, press twice to repeat all tracks and press
(MP3 only) 3 times to repeat the album.
Play/Pause: In CD stop mode, press
play/pause to begin playing a CD. In CD play
mode, press to pause playing of the CD.
Program: Program up to 64 tracks of music,
up to 10 preset AM and 10 preset FM radio
stations. See more about this feature
beginning on page 6 under the heading To
Program MP3 Tracks.
Random: In CD play, pause or stop mode,
press to play all tracks in random order.
Stop: Stops CD play.
Intro: Press to play the first 10 seconds of
each CD track. Press again to cancel.
Numeric Keypad Numbers: In CD mode,
use the numeric buttons 1-0 on the keypad to
enter the track number that you wish to play.
In the AM or FM radio mode use the numeric
buttons to select saved pre set stations. The
numeric keypad may also be used during
programming of saved tracks and pre set radio
stations to enter track and radio pre set
numbers.