PALM HARBOR OUTDOOR WICKER 24" BAR STOOL CO7107-BR
PART LIST Foot panel Seat A 1pc B 2pcs Stretcher C 2pcs HARDWARE LIST Bolt(M6*20mm) Bolt(M6*40mm) Washer(M6mm) D E F 12pcs Screw cap(M6mm) G 16pcs 4pcs Allen Key(M6mm) H 1pc 2 16pcs
Step 1. Attach foot panels (B) into stretcher (C). Please do not screw at this step. C B C B Step 2. Lay seat (A) down on a flat surface.Attach assmbled parts B, C to the seat (A) using bolts (D), washers (F), allen key (H) in vertical direction. Cross direction by using bolts (E),washers (F), allen key (H) . NOTE: Do not fully tighten bolt until all bolts are in place.
Step 3. Using bolts (D), and washers (F) attach stretchers (C) to foot panels (B). C H B F C D B A D F X4 X4 Step 4. Tighten all bolts, and put Caps (G) on the head of bolts.
Step 5. Turn the assembled bar stool upright on a flat surface.