Bradenton Outdoor Wicker Bar Height Stools CO7134
PART LIST A Back Panel 1 PC D C B Stretcher 2 PCS Seat Panel 1 PC E Front Leg 1 PC HARDWARE LIST #1 #2 M6*20mm #3 M6*50mm Long Bolt 4 PCS Short Bolt 12 PCS #4 M6mm Washer 16 PCS M6mm Allen Key 1 PC EXTRA HARDWARE LIST #1 #2 M6*20mm Short Bolt 3 PCS #3 M6*50mm Long Bolt 1 PC M6mm Washer 3 PCS 2 Seat Cushion 1 PC
Step 1.Lay back panel (part #A) on a flat surface.Attach seat panel (part #B) to back panel (part #A) using long bolts (part #2), washers (part #3) and allen key (part #4). NOTE:Please do not fully tighten bolts until unit is fully assembled. B #4 #2 #3 A #2 x4 #3 x4 #4 x1 Step 2.Attach stretchers (part #C) to back panel (part #A) using short bolts (part #1),washers (part #3) and allen key (part #4). NOTE:Please do not fully tighten bolts until unit is fully assembled.
Step 3.Attach front leg (part #D) to assembled parts (part #A,B&C) using short bolts (part #1), washers (part #3) and allen key (part #4). NOTE: Please fully tighten all bolts at this time. D B C #3 #3 #1 #4 #1 #4 #1 x8 #3 x8 #4 x1 Step 4.Carefully turn the stool upright and place seat cushion (part #E) on the stool.