Outdoor Wicker Dining Chair CO7177
PART LIST A C B Left Arm Panel D Right Arm Panel Back Panel Seat Panel Seat Cushion 1 PC 1 PC 1 PC 1 PC 1 PC HARDWARE LIST #1 #2 #3 M6*35mm M6mm M6mm Bolt Washer 11 PCS 11 PCS Allen Wrench 1 PC EXTRA HARDWARE LIST #1 E #2 M6*35mm M6mm Bolt 1 PC Washer 1 PC 2
Step 1. Lay left arm panel (part A) down on a soft flat surface, such as carpet, as shown below. Attach back panel (part C) to left arm panel (part A) using bolts (part #1), washers (part #2) and allen wrench (part #3). NOTE: Please do not fully tighten bolts until unit is fully assembled. #3 #1 #2 #3 #1 #2 C A #1 x2 #2 #3 x2 x1 Step 2. Attach seat panel (part D) to left arm panel (part A) and back panel (part C) using bolts (part #1), washers (part #2) and allen wrench (part #3).
Step 3. Attach right arm panel (part B) to back panel (part C) and seat panel (part D) using bolts (part #1), washers (part #2) and allen wrench (part #3). NOTE: Please fully tighten all bolts at this time. B #2 #1 #3 #2 #1 C #3 D #2 #1 A #3 #2 #1 #3 #1 x5 #2 #3 x5 Step 4. Carefully turn the chair upright and place seat cushion (part E) on the chair.
