Palm Harbor Outdoor Wicker Round Side Table CO7217
PART LIST A C B Wicker Top 1PC Ring 1PC Leg 4PCS HARDWARE LIST #3 #2 #1 M6*20mm Short Bolt 8PCS M6*45mm Long Bolt 4PCS #4 #5 M6mm M6mm Washer 12PCS Allen Key 1PC EXTRA HARDWARE LIST #3 #2 #1 M6*20mm Short Bolt 2PCS M6*45mm Long Bolt 1PC #5 M6mm Washer 3PCS 2 Adjustable Leveler 1PC Adjustable Leveler 4PCS
Step 1. Lay wicker top(part #A)on a flat surface with underside facing up.Attach legs (part #C) to wicker top (part #A) using short bolts (part #1), washers (part #3) and allen key (part #4). NOTE:Please do not fully tighten bolts until unit is fully assembled. #4 C #2 #1 A #1 x8 #3 x8 #4 x1 Step 2. Attach ring (part #B) to legs (part #C) using long bolts (part #2),washers (part #3) and allen key (part #4). NOTE: Please fully tighten all bolts at this time.
Step 3.Screw the adjustable levelers (part #5) into the bottom of the table legs. Adjust as needed to desired position. #5 #5 Step 4.Carefully turn the table upright.