Outdoor Wicker Float Storage Bin CO7303
PART LIST A F B Back Panel 1 PC Divider 2 PCS Bottom Panel 1 PC G Swivel Caster 2 PCS HARDWARE LIST #1 M6*15mm Short Bolt 8 PCS #2 Side Panel 2 PCS H #3 M6*35mm #4 M6mm Long Bolt 16 PCS M6*15mm Short Bolt 2 PCS #2 M6*35mm Long Bolt 3 PCS Front Panel 1 PC Locking Caster 2 PCS Washer 24 PCS EXTRA HARDWARE LIST #1 E D C #3 M6mm Washer 3 PCS 2 M6mm Allen Key 1 PC Bottom Frame 1 PC
Step 1. Lay back panel (part #A) down on a flat surface. Attach bottom panel(part #B) to back panel(part #A) using the long bolts(part #2), washers(part #3) & allen key (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. B A #2 #3 X2 X2 #2 #3 X4 X4 Step 2. Attach side panels (part #C) to back panel (part #A) using long bolts (part #2), washers (part #3) & allen key (part #4).
Step 3. Attach front panel (part #D) to assembled parts (part #A,B&C) using long bolts (part #2), washers (part #3) & allen key (part #4). A C D C #2 #3 X6 X6 #2 #3 X4 X4 Step 4. Attach bottom frame (part #E) to assembled parts (part #A,B,C&D) using the long bolts (part #2), washers (part #3) & allen key (part #4).
Step 5. Attach swivel caster (part #G) and locking caster (part #H) to bottom frame (part #E). G H E A B C Step 6. Carefully turn the cabinet over so the casters are on the floor. Attach dividers (part #F) to bottom frame (part #E) using short bolts (part #1), washers (part #3) & allen key (part #4). NOTE: Please fully tighten all bolts at this time.