Outdoor Wicker Storage Bin CO7305
PART LIST A C B Back Panel 1 PC Front Panel 1 PC E D Right Panel 1 PC Left Panel 1 PC Bottom Panel 1 PC F Top panel 1 PC HARDWARE LIST #1 #2 #3 #4 M6*10mm M6*20mm M6*40mm Short Bolt 2 PCS Medium Bolt 4 PCS Long Bolt 14 PCS #7 #6 M6mm Flat Washer 18 PCS #8 M6mm Plastic Washer 4 PCS M6*40mm Inner Thread Bolt 2 PCS #5 M6mm Allen Key 2 PCS Hinge Support 2 PCS EXTRA HARDWARE LIST #1 #2 #3 #4 M6*10mm M6*20mm M6*40mm Short Bolt 1 PC Medium Bolt 1 PC Long Bolt 1 PC 2 M6*40m
Step1.Lay front panel (part B) down on a soft flat surface, such as carpet as shown below. Attach left panel (part D) and right panel (part C) to front panel (part B) using long bolts (part #3), flat washers (part #5) and allen key (part #8). NOTE: Please do not fully tighten bolts until unit is fully assembled. #8 #3 #5 C D B #3 x4 #5 x4 #8 x1 Step2.
Step 3.Attach back panel (part A) to right panel (part C),left panel (part D) and bottom panel (part E) using long bolts (part #3),flat washers (part #5) and allen key (part #8). NOTE: Please do not fully tighten bolts until unit is fully assembled. A #5 E #3 D #8 #3 x6 #5 x6 #8 x1 Step 4.Carefully turn assembled box over as shown below.
Step 5. Attach top panel (part #F) to back panel (part #A) using lnner thread bolts (part #4), short bolts (part #1) and both allen keys as shown below (part #8). F #8 #4 #1 A D #1 x2 #4 x2 #8 x2 Step 6. Open top panel (part F) and then attach hinge supports (part #7) to top panel (part F) using medium bolts (part #2),flat washers (part #5), plastic washers (part #6) and allen key (part #8).
Step7.Please fully tighten all bolts at this time.