Operation Manual

7 4
Control Locators
Unit Controls
1 iPod Dock
2 Power
3 Light On / Off
4 Program Indicator
5 Repeat Indicator
6 Play / Pause Indicator
7 Mute Indicator
8 Remote Sensor
9 Stand By Indicator
10 Power Indicator
11 CD Drawer
12 Remote Holder
13 Stage light Stop & Run Switch
14 Int./Ext. Speaker Switch
15 Speaker Jacks
16 A/C Power Cord
1
This unit is equipped with external speaker
outputs.
2 The speaker jacks for external speakers are
located on the back of the unit. Beside the
speaker jacks is a switch labeled (int./ext.) When
using external speakers, this switch must be
switched to the ext. position. Doing this turns off
the internal speakers in the unit and redirects
to power to the external speakers.
3 If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.
External Speakers
Lights
Remote Control
Basic Operation Connecting Optional Equipment
1 Gently pull on top right side of tuner door to open.
2 Press light button in to turn lights on.
1 Press the Power (17) button to turn the power
ON/OFF.
2 Press CD/iPod (22) to select CD player or iPod
mode.
3 Use VOL+ (27) and VOL- (28) to adjust the
volume level.
4 Press the MUTE (25) button to mute the volume
completely.
5 The remaining controls are specific to the CD
player. See CD OPERATION for information on
CD player.
SPEAKER
R SP- L
INT.EXT.
STOP RUN
STAGE LIGHT
R SP+ L
15
14
12
16
13
2
3
1
4
5
6
7
8
9
10
11