Operation Manual

9
Troubleshooting Guide
There is no power
1. Press and hold the POWER button for 2 seconds to turn the
unit on.
2. Check the power adaptor to make sure it is plugged into the
unit and into a working wall outlet.
3. Make sure the unit is in the correct mode by pressing the
MODE button.
There is no sound
1. Press the MUTE button on the remote control to make sure
the sound is not muted.
2. Make sure the unit is in the correct mode.
CD will not play
1. Press the PLAY/PAUSE button to make sure the CD is
not paused.
2. Eject the CD and check that the surfaces of the CD are
clean and not scratched.
3. Make sure the CD is an audio CD and does not contain
MP3 files.
The sound is distorted
1. In AM or FM mode, adjust the tuner and/or antenna to
improve signal strength. Under certain circumstances, the
reception may be improved by relocating the unit.
2. In iPod mode, check the EQ settings on the iPod, iPhone
or iPad.
3. In Aux mode, turn off any EQ setting on the portable device.
Check that the volume setting on the portable device is not
turned all the way up.
General
cr3012A_Manual.qxd:Layout 1 8/26/11 10:27 AM Page 10