User's Manual

1. SPEAKERS

2. DIAL SCALE

3. DIAL POINTER

4. TUNING KNOB

5. VOLUME KNOB

6. MODE FUNCTION BUTTONPLAY/PAUSE BUTTON

7. MODE FUNCTION LED

1) FM mode --Pink

2) Bluetooth mode--Blue

3) Aux in mode –Orange

8. PREVIOUS TRACK BUTTON

9. NEXT TRACK BUTTON

10. FM ANTENNA

11. AUX INPUT

12. DC IN

13. ON/OFF SWITCH

Initial Setup

1. Prior to use, check that the mains voltage is the same as the mains voltage stated on the power

adapter.

2. Plug the power adapter (main supply of 10V 1A) into an electrical outlet.

Connect the DC plug of the power adapter into the power adapter connection port (13).

3. Make sure the power switch ON/OFF SWITCH (14) on the back control panel.

4. The device LED indicator will light up in red and then the indicator light turns pink.

5. You could changes the mode via pressing the MODE FUNCTION BUTTON (6) .

6. To adjust the volume, use the rotary knob (5) to adjust the volume.

7. To press the PREVIOUS TRACK BUTTON(9) or NEXT TRACK BUTTON(10) to select the songs

you prefer to.

FM radio mode

1. Make sure the power switch on the control panel (14) is switched on “ON”, the

standby LED light red.

2. Press MODE FUNCTION BUTTON (6) for 2 sec. , the unit will enter FM mode

automatically, the FM mode LED light pink.

3. To improve the radio reception, pull out the FM antenna(11), then gently wiggle the

antenna itself back and forth.You may need to adjust the position of the antenna to

get optimum reception.

4. Turn TUNING KNOB (4) to select your favourite radio stations.

BLUETOOTH mode

1. Make sure the power switch on the control panel (14) is switched on “ON”.

2. Press MODE FUNCTION BUTTON (6) to select BLUETOOTH mode, the Bluetooth

model indicator LED(8) light blue. During the unit searching the bluetooth ,the MODE

FUNCTION LED in blue (8) is blinking.

3. Select from your portable device (Smart phone, Tablet...) the Bluetooth connection

name as “CROSLEY CR7010A”, then confirm connection. When the bluetooth

connected successfully, the MODE FUNCTION indicator LED in blue (8) will stop

blinking.

4. Now you can transfer the music to the unit CROSLEY CR7010A and all operations

can only be operated from your mobile device.