CR3501A Fleetwood Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: Radio Remote Control Power cord 3.5mm aux in cable FM Wire Antenna Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. CD Tray 2. Remote Control Sensor 3. Power Button 4. Open/Close Button 5. Function Button 6. Dimmer Button 7. Mode Button 8. Program Button 9. Volume Knob 10. Backward Skip Button 11. Preset Down Button 12. Play/Pause Button 13. EQ Button 14. Forward Skip Button 15. Preset Up Button 16. RCA Jacks 17. Antenna 18. USB Jack (for SERVICE ONLY) 19.
English 1. Power Button 2. Function Button 3. Info Button 4. Intro Button 5. Stop Button 6. Preset Buttons 7. Numeric Pad 8. Dimmer Button 9. Open/Close Button 10. Shuffle Button 11. Repeat Button 12. Mute Button 13. Play/Pause/Pair Button 14. Skip Button 15. Volume Button 16. EQ Button 17. Bass Button 18. Sleep Button 19. Clock Button 20.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Connect AC adaptor to the Power Jack of the unit. 3. Connect the supplied FM wire antenna to the ANT. socket on the unit. 4. Untie the FM Antenna and allow it to hang in a straight line. Remote Control Prepare the Remote Control First-time use: The unit has a pre-installed lithium CR2025 battery.
English Setting the Alarm 1. In Standby mode, press and hold the Timer/Sleep button on the remote control until the hour digits flash on the display. 2. Press the buttons on the remote control or on the unit to adjust the hour digits, and then press the Timer/Sleep button on the remote control to confirm, the minute digits will flash on the display. 3.
English Radio Operation Tuning in a Station Tune in radio stations automatically - Press and hold the buttons, the frequency changes down or up automatically until a station is found. Tune in radio stations manually - Press the buttons repeatedly until you find the station you want. Note: - The unit is equipped with a FM wire antenna. To FM improve reception, move the wire around until the reception is clear without interferences. Do not connect the wire to any additional antenna.
English CD Playback Operation 1. Press the button on the main unit or press the CD button on the remote control to select CD mode. 2. Press the button on the unit or remote to open the CD tray and put the CD in the tray with the labeled side facing up. 3. Press the button again to close the tray. If it is a blank CD or an unrecognizable CD, it will show “NO DISC”. Playback will start automatically. 4.
English Programmed Playback 1. Press the button on the remote control. 2. Press the PROG button on the remote control or on the unit to enter Memory mode. 3. Press the number (0-9) buttons or buttons on the remote control or on the unit to select the track that you want to preset, then press PROG button to confirm. 4. Repeat step 3 to program more tracks. 5. Press the button to playback program tracks.
English Aux Input Connection You can connect an audio device to this unit and play your music through its speakers. To do this, connect the 3.5mm auxiliary cable between your audio device and the Aux In Jack of this unit and press the or press the AUX button on the remote control. button on the main unit Troubleshooting There is no power Power cord is not connected correctly. No power at the power outlet. CD does not play The CD is blank.
English FCC Statements NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
