Operation Manual

Repeat Playback
Programmed Playback
Getting Started
Control Locators....................... 4,5
Unpacking................................. 6
Power Source........................... 6
Base Operation
Turntable Operation.................. 7
Cassette Operation.................. 8
Radio Operation....................... 8
USB Operation......................... 8
CD Operation
Playing a CD............................. 9,10
Programmed Playback............. 10
Connecting Optional Equipment
Auxiliary Input ......................... 11
General
Troubleshooting Guide.......... 11
Warranty.............................. 12
10
About This Manual
Thank you for purchasing the Crosley Archiver
(CR6001A). Before operating this unit, please read
this manual thoroughly and retain it for future
reference.
Instructions in this manual describe the control
functions of the CR6001A.
Included in the package:
Welcome Table of Contents
1 To repeat a single track, choose the track that
you want to repeat, then press the Play/Pause
Button (16) to start the track. Press the Repeat
Button (9) once to repeat this track.
2 To repeat all tracks, press the Play/Pause
Button (16) to start the CD. Press the Repeat
Button (9) twice to repeat all tracks. Once the
CD ends, it will start over again from the
beginning of the CD.
3 To erase the repeat function, press the Repeat
Button(9) again.
1 Press the Program Button (10). " 01" will
shown on the display.
2 Press the Forward Skip Button (15) or
the Backward Skip Button (14) to select
a track.
3 Press the Program Button (10) again to
store the selected track number.
4 Repeat steps 2 and 3 above to program
other tracks.
5 Press the Play/Pause Button (16) to start
Programmed playback.
6 To erase the programmed sequence,
press the Stop Button (13) twice.
Programmed tracks will also erase
when the CD Door (11) is opened.
NOTE: Maximum of 20 tracks can be programmed
to play in any order.
CD Operation
Archiver
45 RPM adapter
3.5mm Stereo cable
USB cable
Software disc
Software Installation Guide